VRX - BTR Series - Vortex and breaker Pumps

The pumping action is produced by the impeller vanes rotation causing a vortex or turbulence. The open impeller is axially displaced from the pump suction, enabling a free solids passage. Therefore the vortex pumps are able to handle liquids with high solid content, even nearly sizing the discharge diameter. Simple construction, non-clogging and with components free from important wear. These self priming positive displacement pumps have three spindles, one driving and two driven.

BOB – ROBUST CENTRIFUGAL PUMP

Centrifugal Horizontal Pumps "BOB" Series

Design:

• Horizontal centrifugal pump.
• Robust design on a baseplate execution with 2 oil lubricated ball bearings providing a very high reliability to the pump.
• Construction with flexible coupling.
• Pump with high efficiency and low NPSH, consequently the pump has a great suction capacity.
• When it is needed the pump to be selfpriming a vacuum electropump, asembled to the main pump makes such fuction.

LD SERIES PUMP IN-LINE VERTICAL SUCTION PUMPS

Design

• In- line vertical suction, double volute centrifugal pump.
• Robust design with two grease lubricated ball bearings (not in contact with pumped liquid).
• Flexible coupling.
• Priming by vacuum electropump.
• Low NPSH & high efficiency.

SP-BR-BO-MO SERIES PUMP

SP-Series:

Side Channel Multistage selfpriming pumps: Side channel pumps, also called liquid ring pumps, are designed to separate air and liquid from emulsion. These self-primed pumps have a high priming capacity; multi-stage design enables one or several stages assembly. The discharge pressure is directly related to the number of stages. Therefore, SP-Series pumps achieve high discharge pressures at low rotating speeds with fewer stages compared to multistage centrifugal pumps, thus being more economical in operation.

CM - VM - LN SERIES PUMP VERTICAL CENTRIFUGAL PUMPS

Designed for applications with limited space and can be assembled IN-LINE on straight pipelines. The pump inner parts, such as impeller, mechanical seal, ball bearings, wear rings, etc. are easily accessible without any need for suction and discharge pipe removal. Moreover, on the CM-Series it is not necessary to disassemble the motor or electrical connections.

BT SERIES

The BT series spindle pumps are coupled to flexible coupling and driven normally by electric motors. They can also be driven by petrol, diesel, pneumatic or hydraulic motors This pumping design and construction enables a noiseless fluid handling without pressure pulsations and turbulence. Therefore, they can rotate at high rotation speeds with high reliability. These self priming positive displacement pumps have three spindles, one driving and two driven.

CA - SERIES PUMPS SELF PRIMED CENTRIFUGAL PUMPS

CA-Series SELF-PRIMED CENTRIFUGAL PUMPS:

Advantages:

• Self-primed (they do not require any suction foot valve).
• Back pullout design (disassembly without pipe removal).
• Heavy radial ball bearing (grease lubricated).
• Double rotation sense option, assembling interchangeable diffuser and impeller.

SMALL ( DIN 24255) - SERIES SMALL PUMPS FOR GENERAL SERVICES

• PK Series – peripheral electro-pumps.
• JSW Series – self-primed centrifugal pumps.
• CP Series – centrifugal pumps.
• JDW Series – deep-well centrifugal pumps.
• 2CP Series – Twin impeller centrifugal pumps.

BLOC – COMPACT PUMPING MODULES

Compact pumping modules, including pumps, filters and valves