Cables for Crane

• Very strong rotation - resistance
• Suitable rope for very high lifting tower crane
• High structural stability
• Extreamly high breaking load

Instrumentation & Communication 250V

Fixed installation for instrumentation, communication, control and alarm system in both explosion risk and safe areas, general purposes

For installations in areas exposed to MUD and drilling/cleaning fluids we recommend RFOU/B(i&c)

Low Voltage Power & Control

1 -Bare or tinned copper wire conductor

2 -XLPE insulated

3 -Filler

4 -Tape

5 -Bare or tinned copper or Galvanized steel wire braided

6 -Cross-Linked Polyolefin/Thermoplastic Polyolefin

This cable is mainly for power,control devise and lighting for each kinds of river seaships,offshore platform,oil & chemical industry and power system.

Earthing & Bonding Wires 0.6/1KV UX

Application Insulated conductor for earthing and bonding services. On general purposes.

High Voltage Power Cables 3.6/6KV RFOU, RFOU/B

Conductor: Circular tinned stranded Copper in accordance with IEC 60228.
Conductor Screen: Semi conducting material
Insulation: Ethylene Propylene Rubber(EPR)or Cross-linked Polyethylene(XLPE).
Insulation Screen: Semi conducting material and tinned Copper Wire braid.
Cabling: Cores are laid up together and then wrapped by polyester tape
Inner covering: Halogen-free compound
Braid armour: Tinned Copper Wire braid in accordance with IEC 60092-350.
Outer sheath: Halogen-free thermoset compound in accordance with type SHF Mud.

600V Signal Cable (Type P )

- Instrument circuit up to 1kV instrument systems.

- Fixed installation for instrument, communication, control and alarm systems in bothexplosion risk and safe areas, general purposes.

600V Control Cable (Type P)

- Control circuit up to 600V, Control circuits for motor starter, electrical control system, interconnecting - Fixed installation power, control & lighting in both explosion risk and safe areas, general purposes, emergency & critical systems - Designed and constructed for demanding environments and petrololeum facilities located throughout the world

Coaxial Cable Types

Coaxial cables, commonly called coax cables, are used to transmit analog video signals. These cables are constructed in a special way to provide optimal signal transfer while insuring adequate shielding from outside interference. The center conductor (dielectric) of a coax cable carries the video signal and the outside conductor (shield) is used as a return wire and shield.

Power (Distribution) Cable (Type P )

Conductor : Soft annealed tinned copper to ASTM B33 flexible rope stranding or Class B.

Fire Resisting Layer(Optional) : Mica tape (FS Type cable only).

Insulation : Cross-linked polyolefin (Type P) according to IEEE1580-2001, IEEE45-1998 & UL1309(X110)

Jacket : Flame retardant thermosetting neoprene(Type N) according to IEEE1580-2001, IEEE45-1998 & UL1309-1995 * Jacket is not applicable to the single Core Cable Armor(Optional) : Bronze, Aluminum or Tinned copper Sheath(Optional) : Flame retardant thermosetting neoprene (Type N) according to IEEE1580-2001, IEEE45-1998 & UL1309-1995